Aluminun Foil Surface Self-adhesive Bitumen Waterproof Membrane for Concrete Roof
STICKFLAT™ membrane is a normal temperature applied ,self-adhesive, flexible bituminous waterproof sheet based on premium rubber bitumen adhesives, and reinforced with glass fiber mesh or non-reinforced, bottom surface protected by PE release film, top surfaced coated with PE film, HDPE sheet, aluminum foil or mineral slates.
Features
Self-adhesion without bonding agent, or torching.
Good rubber elasticity and elongation
Excellent adhesion bond
Good self-coalescence
Safe application, no pollution
Excellent waterproof and high strength
Available for wet ground 
Upper materials: PE film, Aluminum foil, double-adhesive PE film.
Width: 1m
Thickness: 1.2mm, 1.5mm, 2.0mm
Length: 10m or customized
Why trust us?
√ Certificates: ISO 9001 & 14001, OHSAS 18001, etc.Applications
Widely used in the industrial and civil building roofing, basement, underground, pool,
tunnel, wooden & metal roofing.
tunnel, wooden & metal roofing.
Specially applied in the chemical factory, garment factory, granary, etc.
Especially used in cold places.
Classification
Product property: Type I, Type II.Upper materials: PE film, Aluminum foil, double-adhesive PE film.
Width: 1m
Thickness: 1.2mm, 1.5mm, 2.0mm
Length: 10m or customized
| No. | Item | Index (PE film) | |||||
| Type I | Type II | ||||||
| 1 | Tensile properties | Tensile strength(N/50mm) ≥ | 150 | 200 | |||
| Elongation at Max. tensile strength % ≥ | 200 | ||||||
| Elongation at bitumen breaking % ≥ | 250 | ||||||
| Phenomenon when stretching | No bitumen coating cover layer and PE film separation phenomenon before PE film rupture | ||||||
| 2 | Tear strength N ≥ | 60 | 110 | ||||
| 3 | Heat resistance | 70ºC slippage less than 2mm | |||||
| 3 | Low temperature resistance ºC | -20 | -30 | ||||
| 4 | Watertightness 0.2Mpa,120min | No leakage | |||||
| 5 | Peel strength between membranes N/mm ≥ | 1.0 | |||||
| 6 | Peel strength between membrane and aluminum sheet. N/mm ≥ | 1.5 | |||||
| 7 | Nail bar watertightness | pass | |||||
| 8 | Oil permeability/sheets ≤ | 2 | |||||
| 9 | Holding power/min ≥ | 15 | |||||
| 10 | Heat aging test | Tensile strength retention % ≥ | 80 | ||||
| Elongation at Max. tensile strength % ≥ | 200 | ||||||
| Low temperature resistance ºC | -18 | -28 | |||||
| Peel strength between membrane and aluminum sheet N/mm ≥ | 1.5 | ||||||
| 11 | Heat stability | Appearance | No slipping, flowing or dripping | ||||
| Dimensional Changes % ≤ | 2 | ||||||
Why trust us?
√ Best quality (international standard) & Competitive price.
√ Best & professional service.